Asahi Pentax K-2 Service Manual download pdf (Page 5)

23602 /4

Wind up top 2nd mech. plate assembly (C200) with driver and loosen wind shaft without

moving main gear. Then give back-tension to sprocket gear (C16)

Choose the proper coupling 2nd gear (C205) and install it in the above-mentioned way.

4. Memory block assembly (T400)

After cocking mirror housing, 02mm clearance is necessary between delrin and the longer

contact piece of memoiy block (T400) — See Fig. 12 A

After releasing mirror housing and when mirror stays up, also 02mm clearance is necessary

between two contact pieces of memory block. See Fig. 12 B

5. Shutter dial seat assembly (F000)

Set shutter dial at “B”, and pull meter coupling plate assembly (0-A8) toward counter dial block.

Otherwise, shutter mechanism will not work properly.

Fig. 11

Fig. 12

1 2 3 4 5 6 7 8 9 10 ... 14 15

No comments

Asahi Pentax K-2 Service Manual Page 5